Pianos routinely make movers yearly list of products that are most regularly damaged. Grand pianos are particularly bothersome. Practicing the following procedures for taking apart, cushioning and filling grand pianos will prevent damage, lower claims expenditure, and enhance customer satisfaction.
1) At least three individuals are required to handle a baby grand piano. If the baby grand piano needs to go up or down stairs or if a complete or performance grand piano requires to be carried, a minimum of 4 individuals are required.
2) Constantly finish a precise and comprehensive stock. It may be essential or preferable to utilize a visual stock to properly explain and reveal pre-existing damage.
3) As various parts are disassembled, please location all hardware in an effectively identified parts bag and then put the parts bag in a "Parts Box".
4) Get rid of the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furnishings pad.
5) Detach the lid by eliminating the hinge pins. Have someone wiggle the cover, holding it opposite the hinge, while a second individual works the pin loose. Please beware not to damage the wood with the pliers or with the pin itself. If required, cover the jaws of the pliers with a little cloth to assist prevent damage to the wood. Wrap the lid in a tidy furniture pad.
6) Remove the prop that holds the cover open and cover it in a clean furnishings pad. The prop has a hinge pin and is in two pieces.
7) Get rid of the pedal assembly and wrap it in a clean furnishings pad. The braces at the back of the assembly rest in slots at each end. When eliminating the screws, please be careful not to drop the braces. In addition, please be particularly mindful with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from left to right as "1", "2", and "3", by putting a piece of masking tape with the suitable number on each rod. Note: If masking tape is unavailable, please use properly labeled parts bags for this function. When reassembling at destination, please be sure to put the rods in the right order so that the pedals will work effectively.
8) Pad the piano by placing a tidy rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you deal with the piano. Cover the top of the piano with two clean furniture pads, nicely folded around the keyboard. Usage elastic band to protect the pads. Note: Please ensure that the surface area of the piano is dust-free prior to padding it. Padding a highly polished surface that is dusty might trigger fine scratches, specifically on a black lacquer surface.
9) Position a piano board and connect the straps so that it is prepared to get the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Remove the left front leg by placing one person beneath the piano at the left end of the keyboard. The other two individuals ought to support the left front corner. The individual underneath the piano should turn the retaining block so that the long end points away from the leg. The screws, if there are any, need to then be gotten rid of. The "underneath" individual needs to then get out from under the piano prior to in fact removing the leg. Make certain to have two people raising the corner of the piano while the 3rd person removes the leg. Note: Please make sure to note which legs were eliminated from which positions considering that some pianos have legs that are not interchangeable.
11) Location the this content piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to lift the entire piano somewhat while completing this maneuver to avoid unnecessary pressure on the remaining, connected legs as the piano ideas. Be sure that the piano is centered comfortably against the brace at the end of the piano board.
12) Get rid of the two staying legs and wrap them in tidy furniture pads. These legs are kept in place by a "crucial and slot" arrangement. To get rid of the leg, slide it inward toward the center of the piano till it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furniture pads but under the straps to offer extra protection to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs why not try these out for security versus residence damage, place the keyboard end of the piano toward the bottom of the stairs. Connect a hump strap to the leading end of the piano board to avoid the piano from slipping.
16) To fill the piano, leave it on the piano board and place it in a tier as the first base item with the keyboard facing the wall of the preceding tier. The very best place to fill the padded lid is between the piano and the preceding tier or between the piano and the wall.
Although grand pianos represent a substantial obstacle, they can be moved without damage by utilizing sound judgment and practicing the treatments listed above.